Based on your feedback, we designed iMX6 TinyRex module the way, that you will be able to buy not only powerful, but also cost effective option. It’s going to be manufactured by VOIPAC and here are the prices. I hope you will like them

For more information, go to VOIPAC webshop or check detailed Pricelist >

Brief overview of iMX6 Tine Rex module pricing

All the modules also include: User LED, power LED, 3x 100pins board to board connector and 0°C to +70°C commercial temperature range. As usual, custom builds will be available. Contact VOIPAC directly >

We made couple of power measurements. These are just to give you an idea of iMX6 TinyRex power consumption. More results will come when we have the complete software support, e.g. these tests don’t include running HDMI input or GPU.

iMX6 TinyRex SOLO module (during booting, the maximum 3W)

iMX6 TinyRex QUAD module (during booting, the maximum 5W)

*Notes:
Vin = Input voltage
Iin = Input current
Pin = Vin * Iin

Preparing setup for running tests in Environmental chamber.

For last 9 months we were working really hard Based on your comments, we developed a new module, which is half size of the standard iMX6 Rex and has almost all the iMX6 pins available on the board to board connectors, including camera interfaces. PDF schematic of the iMX6 TinyRex module will be available, but the module is not going to be open source.