Hardware
Software
- How to start with Software
- How to prepare Filesystem
- Source codes (Jethro): uBoot v2015.10; Linux Kernel 3.14; YOCTO - OpenRex Meta Layer
- How to use & access OpenRex peripherals (Examples)
Software (for Developers)
How to edit OpenRex software: How to start developing software for your own boards (OpenRex is used as an example):- How to develop your own software: uBoot, Linux, Filesystem, YOCTO
- How to prepare a Host machine for YOCTO
- YOCTO uBoot: How to add support for a custom board (or OpenRex)
- YOCTO Linux: How to add support for a custom board (or OpenRex)
- YOCTO Meta-layer: How to add support for a custom board (or OpenRex)
- How to Compile YOCTO, Create SD card, Test & Update Software on the Board
- How to edit, customize and test the uBoot, Kernel source codes and YOCTO meta layer
- How to add support for different board model (e.g. SOLO vs QUAD, 2GB vs 512MB)
- How to install WordPress on OpenRex (Apache + PHP + MySQL + WordPress)
- How to create a simple WordPress plugin to Access and Control Hardware
- LPC Microcontroller Graphics Output to a HDMI Monitor (done by Marian)
Other Pages
- How to uBoot – Compile, Flash, Update, Boot
- How to run DDR3 calibration on iMX6
- How to setup MFGTOOL 5.0
- How to update eFuses (“fuse” command)
- NXP Microcontroller LPC13xx programming & testing
- OpenRex PMIC Testing and Programming
- OpenRex EMC Testing
- OpenRex Testing in an Environmental chamber
- List of items which we have used during our testing
- Running Network Performance Test ( iperf / iperf3 )